Please revise your cookie settings to view this video.
Prices incl. VAT plus shipping costs
This product will be released at 3 January 2022
Reverse E - Black ONE D-2 stem 35mm - black / gray1 stem, for 2 handlebar diameters. The Black One D-2 stem builds on the success of our flagship,... more
Reverse E - Black ONE D-2 stem 35mm - black / gray
1 stem, for 2 handlebar diameters. The Black One D-2 stem builds on the success of our flagship, the Black One Enduro stem, and offers the option of using a stem with both Ø31.8 mm and Ø35 mm handlebars.
The specially developed reducing sleeve allows the use of Ø31.8 mm handlebars and when it is removed, you get a Ø35 mm stem. The reduction sleeve offers a wide, smooth clamping area that is ideal for the use of carbon handlebars.
The intelligent and gap-free clamping design in the lower area ensures that there are no crushing points or sharp edges and that the clamping forces are evenly distributed. This ensures safety and optimal technical conditions. Because most of the loads and notch effects are always at the bottom of the handlebars. And our smooth, gap-free clamping surface extends the service life of your handlebars.
The Black One D-2 is ideal for riders who would like to use both Ø31.8 mm & 35 mm handlebars as an option or who might want to switch to a new handlebar in the future without having to buy another stem.
Ever higher loads have to be absorbed by the components because the frequency of trips with an e-bike is significantly higher than without a motor. After-work laps that were completed once in the pre-e-bike era are driven three times today with motor assistance. That is why the cockpits of modern e-bikes have to be able to withstand more than conventional bikes.
We have responded precisely to this development with our E-Series stems! The E-Black One D-2 stem was tested in the EFBE test laboratory according to the "EFBE EPAC MTB-GR Tri-Test", which is one of the toughest test procedures worldwide, and passed all stresses without any problems!
Tested and certified in Germany, this stem can be built on any e-bike without hesitation and impresses with its design and stability!
- Material: aluminum 6061 T6
- Length: 35mm
- Handlebar clamp: 31.8 and 35 mm
- Angle: 8 °
- Clamp height: 40 mm
- Clamping width: 50 mm
- Weight: 152 g
- Reverse E-Safety Level: Category 5
- Incl. reducing sleeve, top cap with screw and claw
|Handlebar Clamping||31.8 mm, 35.0 mm|
|Stem Length||35 mm|
Supplier number: 01633
Sorry, there is no entry at this time