SON Hubdynamo-SON 28-black anodizedThe SON 28 is a hub dynamo that is universally approved for all wheel sizes (16 "to 29"). The... more
SON Hubdynamo-SON 28-black anodized
The SON 28 is a hub dynamo that is universally approved for all wheel sizes (16 "to 29"). The nominal power in the 28 "wheel is about 16 km / h (SONdelux 19 km / h), which makes it highly recommended if you need a lot of light at low speeds or if you want to operate other devices or charge their batteries The new SON 28 is similar to the SONdelux in terms of design and appearance, but the standard version (non-disc) has a flange distance and bearing distance increased by 12 mm and 10 mm compared to the SONDELUX Disc versions are available with 6-hole and Center Lock disc holders Compared to the SON 28 klassik (model year 2000 to 2011), the no-load losses could be reduced by about 15% and the weight by 140 g.
- 16 "to 29" compatible and approved
- Rated power from 16 km / h (SONdeluxe 19 km / h)
- Devices or batteries can be charged with Him
- easier and less apprenticeship losses than its predecessor
- smooth-groove ball bearings
- Flat connector: 4.8mm, two-pole
- Flange distance: 62mm
- Installation width: 100mm
- Weight: 440g
- Hollow axle (10mm)
- 6v / 3W to StVZO
- Number of holes: 32 or 36 holes
- 1 hub dynamo SON 28
- 1 clamping axis
On the function of our hub dynamos, headlights, taillights and wheels we give a 5-year warranty from purchase in stores.
The warranty does not cover damage caused by normal wear and tear, improper use or use of force (eg accident).
In the case of warranty, we will repair the product at our discretion or replace it with an equivalent product.
We also carry out the re-spoking of a defective hub dynamo at our expense in the warranty case.
Further claims are excluded.
Your statutory warranty rights remain unaffected.
To claim the warranty, please contact your dealer.
|Installation Standard||9 x 100 mm (VR)|
|Hole Number||32, 36|
Supplier number: 303212
Sorry, there is no entry at this time