Reverse Seatswitch Type 1 - Saddle Angle Adjuster

The next game changer for e-bikes

Climb like never before... First came the Vario seat post, now there is the Seatswitch.
The Seatswitch is a saddle angle adjuster for Vario seat posts that allows you to ride with more traction, comfort, and control than ever before.

With the lever, you can adjust the angle of your saddle by 6 degrees, lowering the saddle nose by 14 mm (depending on your saddle model),
or raising it depending on the base installation.

This gets you into the optimal uphill position: perfectly balanced and with less pressure on critical areas. You will be able to climb faster and longer - with less pain and more control.

Adjusting the saddle angle for uphill offers many advantages:

• More comfort on long rides
• A stronger forward pelvic tilt for better posture
• Better weight distribution between handlebars and saddle when climbing
• Improved technical climbing skills
• More pressure on the rear wheel when climbing

For which seat post which version is needed, you can find in our compatibility list

Attention: Make sure your saddle has enough build height. At least 25 mm is required (measured from the middle of the saddle rail to the bottom of the saddle)!
Currently, only round standard saddle rails (Ø7 mm) can be used. Adapters for oval saddle rails are in progress!

Features:

• Material: Aluminium / Steel
• Seat post mount: Type 1 (compatibility list) / Additional shim available
• Build height: + 23 mm
• Minimum distance from middle of saddle rail to bottom of saddle: 25 mm
• Angle adjustment: 2 positions (depending on installation either -6°/Neutral or Neutral/+6°)
• Secure saddle clamping through two-screw design
• Weight: 200 g (+/- 5% weight tolerance) (realistic weight increase: Seatswitch weight minus weight of the upper and lower saddle mount of the post (on average about 65 g))