Velocity Hucking Systems VHS 3.0 Slapper Tape - black

Wider, softer, more stable - this is the third generation of the popular VHS Slapper Tape! The VHS 3.0 comes with an improved design, optimized materials, enhanced adhesives, and a new iconic packaging.

It's not easy to develop the perfect Slapper Tape, but the VHS 3.0 is close. 

A significant improvement over the 2.0 Tape is the enlarged base area from 70 mm to 140 mm. This eliminates all exposed edges that could catch on shoes.

• Wider base area of 140mm (encloses the entire chainstay)
• Softer, moldable silicone rubber that perfectly adapts to the shape of the frame
• Flatter, beveled, and softer knobs that specifically deflect and absorb chain impacts
• New, user-friendly adhesive
• Kiss-cut process for easier application of the tape
• UV resistant

Features:

• Length: 350 mm
• Width: 140 mm
• Height: 10 mm

Installation:

• Remove your existing chainstay protector (including any protective film)
• Thoroughly clean the chainstay to remove dirt and old adhesive
• Then wash with isopropyl alcohol to get everything spotlessly clean. Avoid using household cleaners as they often contain silicone, which prevents the adhesive from sticking
• Test the length of the VHS tape and trim it if necessary
• Peel off the middle backing, align the tape, and press it evenly onto the frame. Then, the other two sides are adhered one after the other to ensure a clean result
• Let it cure for at least 30 minutes before riding, up to 6 hours in damp conditions
• Leftover pieces can be used for other small areas
• The VHS 3.0 Tape is already used and loved by some of the fastest racers worldwide and is the ultimate noise damping for your mountain bike