Helite Airbag Vest GP-AIR 2.0

The GP-Air vest has been specially developed for the racetrack. Special emphasis was placed on aerodynamics with a close-fitting design and space for the back hump. To make the vest even more robust, 1.2mm thick cowhide leather was used as the outer material in the chest and back area. The soft collar ensures maximum comfort and that the helmet is optimally supported in the event of a fall.

On the back, there are Velcro areas equipped with removable leather parts. These leather parts can be individually replaced in the event of a fall. Additionally, these parts can be easily adorned with sponsor logos or patches.

In addition to the obligatory turtle protector in the back area, the GP Air features an additional chest protector that also covers the release unit and the capsule. This creates the double turtle effect. Elastic inserts on the sides of the vest ensure a close fit, so the vest sits securely even at high speeds. The biggest feature of the Helite GP-Air is the cutout in the back area. This allows the vest to be worn over racing suits with a large aerodynamic hump.

The vest is closed at the front with several Velcro fasteners, which are easy to handle even with gloves.

Helite has optimized the vest's release time to 75ms, so the 18l protection volume is available even faster.

Like the other Helite systems, the GP-Air offers protection for the neck, spine, rib cage, pelvis, coccyx, head, collarbone, and internal organs. In addition to immense impact protection, the airbag stabilizes the entire upper body against twisting and effectively supports the neck and nape in the event of a crash.

The release is triggered by a ripcord that is firmly connected to the vehicle and plugged into the vest when mounting. It is important that the ripcord is optimally adjusted. This means as long as necessary but as short as possible.

An unintentional release by forgetting to detach the ripcord when dismounting from the vehicle is very unlikely, as a force of about 300Nm is required to activate the airbag. By replacing the CO2 cartridge, the vest is immediately ready for use again after a fall.

This vest was developed and tested by racers for racers. The optimal solution for those who place great value on optimal protection even on the racetrack.

Material components: 43% Polyester, 38% Polyamide, 15% Elastane, 4% Polyurethane

• TURTLE airbag model, fully inflated and maximum pressure after 75ms.
• The hard outer protector, in combination with the shock-absorbing air cushion, ensures optimal impact absorption and protection against penetration.
• The Helite GP-Air airbag is mechanically triggered, preventing false activations or failures. No battery replacement is necessary.
• Very high abrasion resistance due to 1.2mm thick cowhide leather and foam to protect the airbag chamber.
• SAS-TEC EN1621-2, comfortable back protector
• Close-fitting design with elastic material on the sides and space for the hump
• Easy to open with gloves
• Large armholes for unrestricted freedom of movement
• 3 individual width adjustments on the upper body for a perfect fit.