Reverse easyLOOP Ahead Adapter

The top cap adapter for expanding the easyLoop system to be able to install it on even more bikes. The adapter is mounted in place of the existing top cap, thus providing the possibility to install the Reverse easyLoop adapter above the stem. There are several reasons why installation above the stem is necessary.

• For stems that require special spacers and cannot be replaced by the easyLoop adapter (e.g., C.I.S system)
• For bikes where the steerer tube has been cut too short and no spacers can be mounted under or above the stem.
• For bikes where the easyLoop adapter can be installed under the stem, but there is not enough clearance between the easyLoop adapter and the frame.

Not compatible with stems where the top cap is integrated into the stem or require a special top cap.

Warning: No stem should be mounted on the top cap adapter. The adapter is not intended to extend the head tube and should only be used with the easyLoop adapter!

Features:

• Material: Aluminum (body), Rubber (O-rings), Steel (screw)
• Screw: M6 (for standard headset star nuts)
• Weight: 45 g (+/- 5% weight tolerance)