Reverse Seatswitch Type 1 - Saddle Angle Adjuster

The next game changer for e-bikes

Climb like never before... First came the dropper post, now there is the Seatswitch.
The Seatswitch is a saddle angle adjuster for dropper posts, allowing you to ride with more traction, comfort, and control than ever before.

With the lever, you can adjust the angle of your saddle by 6 degrees, which lowers the saddle nose by 14 mm (depending on your saddle model),
or raises it depending on the initial installation.

This puts you in the optimal uphill position: perfectly balanced and with less pressure on critical areas. You will be able to climb faster and longer - with less pain and more control.

Adjusting the saddle angle for uphill offers many advantages:

• More comfort on long rides
• A stronger forward tilt of the pelvis for better posture
• Better weight distribution between handlebars and saddle uphill
• Improved technical climbing abilities
• More pressure on the rear wheel uphill

Which version is needed for which seat post can be found in our compatibility list

Note: Make sure your saddle has enough build height. At least 25 mm is required (measured from the middle of the saddle rail to the bottom of the saddle)!
Currently, only the use of round standard saddle rails (Ø7 mm) is possible. Adapters for oval saddle rails are in progress!

Features:

• Material: Aluminum / Steel
• Seat post mount: Type 1 (compatibility list) / Additional shim available
• Build height: + 23 mm
• Minimum distance middle saddle rail - bottom of saddle: 25 mm
• Angle adjustment: 2 positions (depending on installation either -6°/Neutral or Neutral/+6°)
• Secure saddle clamping through two-bolt design
• Weight: 200 g (+/- 5% weight tolerance) (realistic weight increase: Seatswitch weight minus weight of the upper and lower saddle mount of the post (on average about 65 g))