Reverse Black One Enduro Stem 35 mm - black/green - 35 mm

No discipline is as broadly defined as enduro riding. The bicycles used are true all-rounders. They are suitable for everything from trail riding to trips to the bike park. And it is precisely for these purposes that the Black One Enduro stem was developed and designed! This stem underwent the "EFBE MTB Gravity TRI-Test," which is currently one of the toughest laboratory tests available. Even after hundreds of thousands of load cycles in the EFBE laboratory, this stem could not be pushed to its limits.

To further reduce stress on the handlebar, we developed the Stress Reduction Clamping (SRC). The greatest stress areas are located at the transition between the stem and the handlebar. Particularly at the lower gap of the handlebar clamp, high stresses occur.

The SRC technology prevents the otherwise inevitable notch effect, as there is no longer a gap. Only at the upper side of the stem clamp is a gap still required for clamping action! Thus, an almost optimal force transmission with reduced notch effect is achieved all around. A significant stress reduction on the handlebar was proven in laboratory tests!

This technology is especially recommended when using carbon handlebars. With a "length" of 35 mm, it is ideally suited for modern frames with a long top tube/reach!

• Material: Aluminum 6061 T6
• Handlebar clamp: Ø 35.0 mm
• Length: 35.0 mm
• Height: 40 mm
• Clamp width: 50 mm
• Angle: 8°
• Steerer tube: 1 1/8''
• Weight: 130 g