Velocity Hucking Systems VHS 2.0 Slapper Tape - blue

VHS is back! And a lot of work must have taken place behind the scenes because the Slapper Tape has become more powerful than you could ever imagine.

VHS 2.0 is bigger and more resilient with a wider base of 70 mm (instead of 25 mm on the original) that wraps around the chainstay and adapts to the shape of the frame. The new design is UV-resistant and has softer air bubbles for an even smoother ride without compromising durability. VHS (Velocity Hucking Systems) was developed in New Zealand and tested on some of the wildest trails in the world and found to be good. The tape replaces the tattered tubes or flimsy factory protection stickers on the chainstay with a durable and effective noise dampener that makes your bike look really professional. Give your bike a thorough noise treatment.

Who is this product suitable for:

The VHS 2.0 Slapper Tape is perfect for anyone who is tired of enduring the loud noise of the chain slapping on rough trails. VHS 2.0 Slapper Tape is a clean and effective solution that eliminates the noise of chain slapping forever.

• Made from moldable and UV-resistant silicone rubber
• Length: 350 mm
• Width: 70 mm
• Height: 10 mm

Installation

• Remove your existing chainstay protector (including any protective film).
• Thoroughly clean the chainstay to remove dirt and old adhesive.
• Then wash with isopropyl alcohol to get everything sparkling clean.
• Avoid using household cleaners as they often contain silicone, which prevents the adhesive from sticking.
• Test the length of the VHS tape and trim if necessary.
• Peel off the backing tape and apply even, firm pressure while attaching the VHS tape to the bike.
• Let it cure for at least 30 minutes before riding, up to 6 hours in damp conditions.
• Leftover pieces can be used for other small areas.