Sign up for the newsletter and receive a 5 € coupon *

Nitto

(19 Articles)
Close filters
 
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
 
No results were found for the filter!
Lenkerendkappe Bar End Cap EC-01 Nitto
Bar End Cap EC-01
Extremely high quality handlebar end caps from Nitto. solid aluminum construction Made in Japan for inner handlebar diameter from 19 mm - 22 mm Material: aluminum Color: silver, black, gold, red, blue
€11.90
AS-2 cable stopper - rear Nitto
AS-2 cable stopper - rear
Brake cable counterholder for middle cable or cantilever brakes on frame without fixed counterholder. The Nitto AS-1 and Nitto AS-2 Outer Cable Stopper are attached directly to the saddle clamp bolt, allowing the use of mid-cable and...
€20.90
B-123AA Track Bar 25,4mm - silver Nitto
B-123AA Track Bar 25,4mm - silver
Classic track racing handlebar with soft curvature and enough armroom. Also great for Keirin (NJS certified) and Fixie driving in town. Material: Duralaluminum, heat treated Diameter: 25.4 mm Drop: 175 mm Reach: 108 mm Width: 36 cm; 38...
€89.90
Wire Guard Protect für Satteltasche Nitto
Wire Guard Protect
Great tool from Nitto- Simply clip it into the frame via the brake, and from then on no problems with the bag-brake conflict behind!
€32.90
RB-021 Bullhorn Lenker 400mm 25.4mm silber Nitto
RB-021 Bullhorn bar 400mm 25.4mm silver
The RB-021 by Nitto is a classic Bullhorn handlebar in best workmanship. In the clamping area Nitto logo and name of the handlebar are discreetly stamped. Due to the processing of butted aluminum tube this Bullhorn handlebar weighs less...
€49.00
Bremszug Gegenhalter AS-3 Nitto
Brake cable stop AS-3
The AS-3 is the shorter brother of the AS-2 brake cable counterweight for mid-cable or cantilever brakes on frames without fixed counterholds. The brake cables are chrome plated, hand soldered and polished. EAN: 4582350851557
€10.90
B-123AA Track Bar 31,8mm 400mm - silver Nitto
B-123AA Track Bar 31,8mm 400mm - silver
Classic track racing handlebar with soft curvature and enough armroom. Also great for Keirin (NJS certified) and Fixie driving in town. Material: Duralaluminum, heat treated Diameter: 31.8 mm Drop: 175 mm Reach: 108 mm Width: 400 mm...
€74.90
NJ Pro AA Vorbau 25.4mm - schwarz Nitto
NJ Pro AA Track-stem Alu NJS - 25.4mm
NJS for Keirin. Made in Japan. Material: aluminum Shaft clamping: 1 " Handlebar clamp: 25.4 mm Stem length: 80, 90, 100 mm Angle: 58 ° (or -32 °) Weight: 295 g Color: Black
€99.00
B-123AA Track Bar 25,4mm - black Nitto
B-123AA Track Bar 25,4mm - black
Classic track racing handlebar with soft curvature and enough armroom. Also great for Keirin (NJS certified) and Fixie driving in town. Material: Duralaluminum, heat treated Diameter: 25.4 mm Drop: 175 mm Reach: 108 mm Width: 40 cm...
€82.90
NJ Pro AA Vorbau 25.4mm - silber Nitto
NJ Pro AA track stem Alu NJS - 25.4mm
NJS for Keirin. Made in Japan. Material: aluminum Shaft clamping: 1 " Handlebar clamp: 25.4 mm Stem length: 80 mm, 90 mm, 100 mm, 110 mm Angle: 58 ° (or -32 °) Weight: 295 g Silver
€99.00
Dynamic NTC-A Rennrad-Vorbau Nitto
Dynamic NTC-A stem - 25.4mm
Road forged stem made of forged aluminum for 1 "forks. Shaft clamping: 1 " Handlebar clamp: 25.4 mm or 26.0 mm Shaft length: 145 mm Stem length: 90mm, 80mm; 100mm, 110mm Angle: 72 ° (or -18 °) Silver
€54.90
MTC-02 Ahead Adapter - für 1 1/8 Zoll Gabel auf 1 1/8 Zoll Ahead Vorbau Nitto
MTC-02 Ahead Adapter - for 1 1/8 inch fork to 1...
With the MTC adapter from Nitto you can drive a 1 1/8 inch threaded fork with a 1 1/8 inch Ahead stem. Ahead adapter made of high quality aluminum 1 1/8 inches to 1 1/8 inches Made in Japan!
€49.90
UI-21BX Road Racing Stem - 31.8 mm - black Nitto
UI-21BX Road Racing Stem - 31.8 mm - black
UI stands for Ultimate Ideal at the new Nitto stem. The cold forged aluminum stem with the noble polished surface embodies the classic Nitto look, which fits perfectly with Retroracer. Material: cold forged aluminum Handlebar clamp size...
€69.00
B903 Fairweather Bullmoose Lenker/Vorbaukombination  - Silver Nitto
B903 Fairweather Bullmoose...
Stem / handlebar combination made of CroMo steel handmade by Nitto in Japan. Width: 710 mm Nose length: 90 Back sweep: 15 ° Diameter for brake lever clamp 22.2mm Grip area: 27cm Weight 693g
€99.00
B903 Fairweather Bullmoose Handlebar / Stem combination - black Nitto
B903 Fairweather Bullmoose Handlebar / Stem...
Stem / handlebar combination made of CroMo steel handmade by Nitto in Japan. Width: 710 mm Nose length: 90 Back sweep: 15 ° Diameter for brake lever clamping: 22.2 mm Grip area: 27 cm Weight: 693 g
€109.90
B-123AA Track Handlebar 25,4mm 380mm - black Nitto
B-123AA Track Handlebar 25,4mm 380mm - black
Classic track racing handlebar with soft curvature and enough armroom. Also great for Keirin (NJS certified) and Fixie driving in town. Material: Duralaluminum, heat treated Diameter: 25.4 mm Drop: 175 mm Reach: 108 mm Width: 380 mm...
€82.90
B-123AA Track Handlebar 25,4mm 390mm - black Nitto
B-123AA Track Handlebar 25,4mm 390mm - black
Classic track racing handlebar with soft curvature and enough armroom. Also great for Keirin (NJS certified) and Fixie driving in town. Material: Duralaluminum, heat treated Diameter: 25.4 mm Drop: 175 mm Reach: 108 mm Width: 390 mm...
€82.90
RB-018SSB Handlebar - Silver - 380 mm Nitto
RB-018SSB Handlebar - Silver - 380 mm
Classic bullhorn handlebar with 31.8 mm handlebar clamp Width: 380 mm Handlebar clamp: 31.8 mm Drop: 0 mm Reach: 154 mm Material: aluminum
€94.90
Hint!
NP stem - Pearl NJS Nitto
NP stem - Pearl NJS
You are looking for a simple stem for your classic racer? Then you will like this one! Material: aluminum Handlebar clamp: 25.4 mm Shaft clamping: 22.2 mm Shaft length: 150 mm Length: 90 mm Angle: 71 ° Weight: 315 g
€74.90