Reverse Black One Enduro Stem 35 mm - black/yellow - 35 mm
No discipline is as broad as enduro racing. The bikes used are true all-rounders. They can be used for trail riding or for a trip to the bike park. And it is exactly for these purposes that the Black One Enduro stem was developed and designed! This stem was subjected to the ''EFBE MTB Gravity TRI test'', which is currently one of the toughest laboratory tests. Even after hundreds of thousands of load changes in the EFBE laboratory, this stem could not be brought to its limits.
To take even more stress from the handlebars we have developed the Stress Reduction Clamping (SRC). The biggest stress areas are at the transition between stem and handlebar. Especially at the lower gap of the handlebar clamping large loads occur.
The SRC technology prevents the otherwise inevitable notch effect, as there is no longer a gap. Only on the upper side of the stem clamping a gap is still needed for the clamping effect! This results in an optimal power transmission with reduced notch effect almost all around. A significant stress reduction on the handlebars could be proven in laboratory tests!
This technique is particularly recommended when using handlebars made of carbon. With a ''length'' of 35 mm, this is optimally suited for modern frames with a long top tube / reach!
- Material: Aluminium 6061 T6
- Handlebar clamp: Ø 35.0 mm
- Length: 35.0 mm
- Height: 40 mm
- Clamping width: 50 mm
- Angle: 8°
- Headtube: 1 1/8''
- Weight: 130 g
|Handlebar clamping dimension||35.0 mm|
|Stem angle||8 degrees|